I'm in the process of setting up SRM 5.1 to work with our EMC VNX arrays. The arrays are using Mirrorview to replicate the LUN's
I've got SRM installed on a server at each location and successfully paired. I installed the VNX SRA, the "EMC_VNX_Replicator_Enable_for_VNX_SRA" 5.0.15, "EMC MirrorView Enabler for VNX" 5.0.23, and NaviCLI 7.32. I used the x64 version for all items, except NaviCLI (only 32bit available)
I did a "rescan SRA" and it detected everything OK. The support array modles and software are correct..
The problem I'm having is when I try to add the array manager. I enter the display name, then on the "configure EMC storage connection" I enter IP's for the SPA and SPB, and the credential.
When I click on "next", after a short delay I get "Unable to locate enabler for input connection information. Verify the Management IP/Hostname and credentials".
I've done some searching and found some site with similar issues, but haven't found any solution.
I will probably open a ticket with EMC, but I'm hoping someone here can help me.
Mike O.